What else should you pay attention to when choosing a pumping station?
Body material. Low noise and affordable cost differ pumping stations with cast iron housing. However, they have one drawback – with prolonged downtime, rust can accumulate, and the first portion of water will contain impurities. Many manufacturers, such as Gillex, have learned to deal with this problem: cast iron is covered with a protective layer that prevents the formation of rust. The most popular station is made of stainless steel, the body of which has a characteristic Shine and does not corrode when in contact with water. But their cost is much higher, and the work is accompanied by noise. The undisputed leader is the equipment with a plastic body-it combines the advantages of the types described above: it has a low noise level, does not form rust and maintains the ecological purity of water.
Here are the best pumping stations
https://www.water-pumps.ru/catalog/nasosnye-stantsii.html
The presence of an ejector. The element is a jet pump necessary to prevent the effect of cavitation, and helps the equipment to suck water from a great depth. Not all models have it. Stations without an ejector can lift water from a depth of no more than 7 m. ejector models have a suction depth of up to 9 m. By the way, the latter work quite noisy and cost more. The technique without an ejector will be an excellent solution in cases where the suction depth is small, for example, in 5-6 m. By the way, there are remote ejectors that are installed directly at the point of water intake and attached to the suction hose. However, they are very sensitive to the quality of the water being pumped.
Equipment protection. Most models of pumping stations have built-in protection against overheating, which helps to extend the life of the electric motor. Protection of electrical components from water splashes and dust is provided. The higher the IP class of electrical protection, the better the protection. For example, IP 54 provides protection against dust and water splashes from any direction inside the enclosure.
Have you already decided which pumping station to choose? Place an order on our website. Use the convenient selection form for parameters. The filter will only select models that fit your requirements. It will remain for small – to give preference to a single one. Don't forget to buy related components for an Autonomous water supply system, such as a non-return valve, suction hose, safety shut-off device, etc. Proper selection and installation of pumping equipment is the key to its smooth operation for many years. Let your home water will always be in the right amount, and you do not have to make any effort!
What else should you pay attention to when choosing a pumping station?
