You May Also Like
حصة الاجتماعي
معلومات
معلومات اساسية
-
منشور من طرف:
xiu umin
-
تاريخ النشر:
Mar 26, 2019
-
آخر تحديث:
Mar 26, 2019
-
Members:
1
-
الآراء:
2
-
الإعجابات:
1
الفئة:
أماكن
العلامات:
#Household Product Mould
وصف:
The already existing material will be cooled and the consistency with the shape of the Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
cannot be obtained. Therefore, when an unfolding flag occurs, the first action should be to check if the...أكثر منThe already existing material will be cooled and the consistency with the shape of the Household Product Mould(FURNITUREMOULD) https://www.furnituremould.com/product/daily-necessities-mould/
cannot be obtained. Therefore, when an unfolding flag occurs, the first action should be to check if the hydraulic system can be filled at the correct rate and allowed time. If so, and the unfolding mark is still present, check the gate and runner system for any points that may lose pressure and flow during filling and, if desired, make it larger or more direct. The land length of the gate should also be as short as possible.
Gap marks are particularly prone to occur in moldings made of acetal, probably due to their slightly higher melt viscosity. However, as already mentioned, this drawback has been observed when producing small molded articles in many other materials on handheld machines or low power machines. There is little that can improve this molded article, and it must be remembered that their performance may be impaired. Any molding that exhibits a discontinuous surface finish is suspicious and may completely rupture or rupture in an aggressive environment.
Click Daily Necessities Mould https://www.furnituremould.com/product/daily-necessities-mould/
to learn about more information. أقل
Share