-
Find in Members
Find in Videos
Find in Channels
This website uses cookies to ensure you get the best experience on our website.
To learn more about our privacy policy Click herePrivacy Preference
Categories
129 pages found.
Map View
Grid View
List View
-
Fri at 7:52 PM - posted by xiu xiu, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe public lighting(CLASSICLEDLIGHT) https://www.classicledlight.com/
is an indispensable part of our life. It dispels the darkness at night and brings us light. It is a "companion" who accompanies... moreThe public lighting(CLASSICLEDLIGHT) https://www.classicledlight.com/
is an indispensable part of our life. It dispels the darkness at night and brings us light. It is a "companion" who accompanies us home at night. Street lights rely on light energy as a power source to realize independent public lighting. Since street lights use intelligent automatic lighting, how can street light manufacturers configure controllers to achieve good public lighting when installing street lights in order to ensure the quality of public lighting?
In order to ensure the normal operation of the entire public lighting system, the controller should be able to ensure that the battery components are not overcharged or voted on and damaged under any conditions, and have control, control, voice control, temperature compensation, lightning protection and reverse polarity protection functions at the same time. In addition, the controller is responsible for monitoring the charging state of the battery module and managing the charging process including the opening and closing of the load, so that the battery module can make full use of energy and prolong the service life. When configuring the controller, it can limit the charging voltage to prevent overcharged battery modules, close the load to prevent discharge, and the controller can prevent excessive current. When the temperature is too high, the controller can automatically open or close the load or components. Overvoltage, the load can shut down the load.
Due to the non-contact control technology adopted by the controller, it has advanced control functions, is especially suitable for street light and photovoltaic power generation control through automatic load switching, and has various protection functions. Therefore, when installing street lights, street light manufacturers can only achieve good public lighting by reasonably configuring the controller.
Click Led Public lighting https://www.classicledlight.com/
to learn about more information. less -
Wed at 7:50 PM - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe occurrence of wear and tear and cracking during the application of the conveyor chain(GETECHAIN) https://www.getechain.com/product/conveyor-chain/
are common work, and the general chain shows... moreThe occurrence of wear and tear and cracking during the application of the conveyor chain(GETECHAIN) https://www.getechain.com/product/conveyor-chain/
are common work, and the general chain shows more wear and tear. Wear is generally due to the chain used for a long time, improper operation in the process of use, the chain used steel material is inferior, etc.
The slight wear of the conveyor chain will not cause great harm to the chain. instead of replacing the chain from the beginning, the chain can be reversely installed so that the worn side faces the sprocket. If both sides of the chain are worn, it can only be replaced.
In addition, to wear and tear, the conveyor chain will often crack. Cracking usually occurs when the chain is improperly used. For example, if the chain carries too much material and exceeds the load of the chain, the chain will crack. Also, during the application process, the chain works continuously, which prevents the chain from resting and cracks.
The maintenance of the conveyor chain is very important with respect to the service life of the chain, and the chain should be smoothly tidied up and dirty regularly. The application environment of the chain is also crucial to the service life of the chain. Generally speaking, it is better to use stainless steel chains, galvanized chains and nickel plated chains in corrosive occasions and outdoors.
Click agricultural chain https://www.getechain.com/product/agricultural-chain/
to learn about more information. less -
Mon at 7:56 PM - posted by ko koele, 1 like, 0 followers, 1 member, 0 comments, 1 viewHow can we avoid buying unqualified Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
? In fact, the failure of the water purifier spare parts usually manifests in three... moreHow can we avoid buying unqualified Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
? In fact, the failure of the water purifier spare parts usually manifests in three aspects:
1. The organic removal rate is unqualified
These water purifiers remove organic matter mainly depending on the filter element. However, if the filter carbon is of poor quality, the purified water flow rate and the rated total purified water volume are too large, which may cause the water purifier to have a low removal rate of organic matter.
2. The total number of colonies exceeds the standard
The water purifier components such as filter elements and membrane elements may be contaminated by bacteria during the manufacturing and installation process, dissolved in the soaking water and propagated in the water, resulting in the total number of colonies exceeding the standard.
3. Excess arsenic
Activated carbon, which may cause excessive arsenic, may be contaminated by raw materials or manufacturing processes of activated carbon, and contains trace amounts of arsenic. In addition, alloy materials may also be the source of excessive arsenic.
Finally, we must come up with a determination to resolutely reject the unqualified water purifier. At the same time, we must also understand that each qualified water purifier will have a Chinese wading sanitation license, and only have a “Chinese wading sanitation permit”. The product of the "Approval" is the water purifier that consumers can purchase and use with confidence.
Click Water Filter Spare Parts https://www.kokoelectric.com/
to learn about more information. less -
Aug 18 - posted by xiu umin, 1 like, 0 followers, 1 member, 0 comments, 1 viewFor crate, the wall thickness of the Crate Mould(FURNITUREMOULD) https://www.furnituremould.com/
is very important, which directly affects the overall appearance and quality of the plastic parts.... moreFor crate, the wall thickness of the Crate Mould(FURNITUREMOULD) https://www.furnituremould.com/
is very important, which directly affects the overall appearance and quality of the plastic parts. Moreover, the difference in wall thickness will directly affect the cost of plastic products. Therefore, how to choose the wall thickness of the crate mould is crucial for the design of the entire plastic part.
Generally, the wall thickness of the crate mould is in the range of 1 to 6 mm, and the maximum is 8 mm. The most common wall thickness value is 1.8~3mm. When designing the crate mould, how to design the wall thickness should consider the following points:
1. Minimize wall thickness while meeting the requirements for use.
2. The wall thickness of each part of the part is as uniform as possible to reduce internal stress and deformation.
3. The compressive strength must be guaranteed for the part that is subjected to the tightening force.
4. Avoid shrinkage and dents in overly thick areas.
5. The impact of the impact force can be withstood when the moulding is ejected.
6. The wall thickness should be as uniform as possible to avoid sudden changes.
Click Dustbin Mould https://www.furnituremould.com/
to learn about more information. less -
Aug 15 - posted by xiu weetime, 1 like, 0 followers, 1 member, 0 comments, 1 viewEnameled Wire(XINYU) http://www.xinyu-enameledwire.com/
can be divided into polyester enameled wire, polyester-imide enameled wire, polyamide-imide enameled wire, polyimide enameled wire,... moreEnameled Wire(XINYU) http://www.xinyu-enameledwire.com/
can be divided into polyester enameled wire, polyester-imide enameled wire, polyamide-imide enameled wire, polyimide enameled wire, polyester-imide/ The polyamide-imide enameled wire, corona-resistant enameled wires, oily paints, acetal paints, polyurethane enameled wires, etc. according to the insulation paint used. Sometimes it is also classified according to the particularity of its application, such as self-adhesive enameled Wire, cryogen-resistant enameled wire, etc.
The earliest enameled wire was oily enameled wire, made of tung oil, etc. The paint film has poor abrasion resistance and cannot be directly used for manufacturing motor coils and windings, and a cotton yarn wrapping layer needs to be added when in use. , can be directly used in motor windings and is called high-strength enameled wire.
With the development of weak current technology, self-adhesive enameled wire has appeared again, and coils with better integrity can be obtained without impregnation and baking. However, its mechanical strength is poor, and it can only be used in micro and special motors and In addition, in order to avoid the trouble of removing the paint film in advance during welding, a direct-welding enameled wire has been developed, the coating film of which can automatically fall off in a high-temperature tin lining tank, Thus making the copper wire easy to weld.
Due to the increasingly wide application of enameled wires and the increasingly strict requirements, composite enameled wires have also been developed. The inner and outer paint films are made of different polymer materials, such as polyesterimide/polyamideimide enameled wire.
Click Enameled Copper Clad Aluminum Wire http://www.xinyu-enameledwire.com/product/enameled-copper-clad-aluminum-wire/
to learn about more information. less -
Aug 14 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe conveyor belt using a Roller chain(GETECHAIN) https://www.getechain.com/product/driving-chain/heavy-roller-chain/
is not prone to snaking and deviation, and because the belt is thick and can... moreThe conveyor belt using a Roller chain(GETECHAIN) https://www.getechain.com/product/driving-chain/heavy-roller-chain/
is not prone to snaking and deviation, and because the belt is thick and can withstand cutting, bumping, oil resistance, water-resistance, and other characteristics, the industry will not encounter troubles in maintenance when using it, especially when replacing the plastic steel belt conveyor on the conveyor belt, which will reduce an expense. We should understand the operating performance of this object and the relevant precautions, then separate from the relevant key points and do a good job of maintenance. Only in this way can we extend the sensitivity of the sprocket. Other products with guaranteed quality will also have various problems with the passage of time. Therefore, users need to control the operating strength of the sprocket, stick to its tightness and reach the specified standard. If it is too tight, it will also greatly increase its consumption rate. Therefore, this will lead to severe wear of bearings. If other sprockets are too loose, there will be obvious chain release. Therefore, during operation, we will set the spacing within the regular range. At the same time, the staff also need to adjust the center distance of the sprockets below 0.5 meter to avoid obvious errors. Otherwise, friction effect will occur between the two wheels. Therefore, the operator should check and check the pauses of the sprockets.
Hyperbolic gear transmission is widely used in car rear axle final drive because of its good meshing smoothness and large reduction ratio. However, due to the high transmission pressure and high relative sliding speed in the meshing transmission process of hyperbolic gears, high instantaneous temperature occurs. Under such extreme pressure conditions, in order to avoid abrasion, scratch, and adhesion, the friction on the metal touch surface must be reduced, so some organic compounds are added into hyperbolic gear oil as extreme pressure additives. For general gear transmission, the unit pressure of the tooth surface is low and the working temperature is not high, so the oil film is not easy to crack and the smooth condition is good, so extreme pressure additive is not necessary. If hyperbola gear oil is used, some additives will produce effects, thus causing unnecessary corrosion and wear of gears. Therefore, it is not correct to simply think that hyperbola gear oil has good performance and can replace common gear oil. Instead, gear oil with appropriate performance should be selected according to the characteristics of gear transmission.
Click heavy roller chain https://www.getechain.com/product/driving-chain/heavy-roller-chain/
to learn about more information. less -
Aug 7 - posted by xiu xiu, 1 like, 0 followers, 1 member, 0 comments, 1 viewLamps manufacturers produce all kinds of lamps and lanterns, which can be used in different environments. With the development of science and technology, people pay more and more attention to... moreLamps manufacturers produce all kinds of lamps and lanterns, which can be used in different environments. With the development of science and technology, people pay more and more attention to spiritual culture. For the city, its lamps also play a certain publicity role, so what is the role of Led Public lighting(CLASSIC) https://www.classicledlight.com/
?
LED public lighting is not only a square landscape lighting fixture for the city but also an indispensable and important part of the city landscape beautification project construction. The city square is the display of the city's overall cultural spirit, cultural landscape, social style, and natural landscape, and is an indispensable link in the construction of the city landscape beautification project. Not only has its own high ornamental value, but it also emphasizes the coordination and unification of the artistic lamp landscape and the surrounding environment of the square.
The choice of lamps and lanterns should be made according to different environments because it not only plays a lighting effect but also should be harmonious and unified in the surrounding environment to achieve better lighting and beautification effect. Of course, it should also be maintained frequently when in use.
Click public lighting https://www.classicledlight.com/
to learn about more information. less -
Jul 31 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe device of the China chain factory(GETECHAIN) https://www.getechain.com/
has a first conveying chain and a second conveying chain intersecting therewith, and the conveying article is displaced... moreThe device of the China chain factory(GETECHAIN) https://www.getechain.com/
has a first conveying chain and a second conveying chain intersecting therewith, and the conveying article is displaced from the first conveying chain to the second conveying chain, and the conveying direction of the conveying article can be changed substantially at a right angle. The first conveyor chain S1 is rotatably supported by an end bar or a small diameter sprocket, and the second conveyor chain is composed of at least two types of chain assemblies and connecting pins of different lengths.
A chain positioning device is provided, comprising a driving sprocket, a driven sprocket, and an endless chain, wherein the driving sprocket is driven by the crankshaft; the driven sprocket is driven and connected by an output shaft that rotates with the driving wheel of the bicycle; the endless chain is wound around In the above-described drive sprocket and the chain locating device for a bicycle shifting device, the chain of the bicycle shifting device may be bent or slackened due to the running operation of the bicycle or the up-and-down vibration, etc., and the chain may be arranged in a row. The ground is positioned on the drive sprocket.
The chain drive and the central heating mechanism, the chain transmission mechanism comprises a chain and a plurality of transmission gears, the chain is fixed with a plurality of chain block assemblies, wherein the chain block comprises a chain block, and each of the chain blocks is provided with a heating seat for fixing the preform The chain drive mechanism further includes a plurality of sets of reversing disc assemblies, the chain being inverted at an angle of 90° or 180° around the reversing disc assembly, wherein the chain is reversed by 180° to form two columns of mutually opposite reverse chains.
The chain tongs include a caliper body and a chain. One end of the chain is a connecting end that is connected to the caliper body, and the other end is a free end. At least one of the caliper body and the chain or the caliper body and the chain is provided for fixing or limiting the chain. A magnetic adsorbing member located on the caliper body for reducing or eliminating the ineffective swing of the free end of the chain. The magnetic adsorbing member may be disposed at the end of the free end of the chain. Directly used to stabilize the excess needed for multiple clips.
The separate chain cover of the setting machine is mainly composed of a chain carrier, a two-chain body, a chain cover, a needle plate seat and a nut, and is embedded in the sprocket on both sides of the chain body. The column tip tube is sleeved on the branch posts on both sides of the chain carrier, and a separate horseshoe chain cover is sleeved by the upper-end piece of the chain body, and the needle plate seat is pierced by a pair of corresponding chain cover plates. On the pillars, each of the nut locks is integrated, and the oil groove is applied to the chain cover.
Click China chain supplier https://www.getechain.com/
to learn about more information. less -
Jul 28 - posted by xiu umin, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe precision of Dustbin Mould(FURNITUREMOULD) https://www.furnituremould.com/
is mainly reflected in the machining precision of mould parts and the matching precision of relevant mould parts, which... moreThe precision of Dustbin Mould(FURNITUREMOULD) https://www.furnituremould.com/
is mainly reflected in the machining precision of mould parts and the matching precision of relevant mould parts, which is a comprehensive index. High-quality parts for dustbin mould are the premise to ensure the mould precision, but no good mould assembly can also produce high-precision mould. Although restricted by the technical means of mould processing, the precision of general moulds should be coordinated with the precision of products.
The accuracy measured by the dustbin mould in the non-working state is the static accuracy of the mould. In the working state, the static precision changes due to the influence of the processing environment, which is called the dynamic precision of the die. The dynamic precision of the mould has real practical significance in actual production.
The main factors affecting the accuracy of the dustbin mould are as follows:
(1) Precision of product parts. The precision of the working part of the dustbin mould is higher than that of the product parts. The higher the precision of the product parts, the higher the precision of the working parts of the dustbin mould. The precision of the mould not only has a direct influence on the precision of the products, but also has a great influence on the production cycle and production cost of the mould.
(2) The level of technical means for the processing of dustbin mould. The level of processing precision, automation and other technical means of mould processing equipment is the basic condition to ensure the accuracy of the mould. The accuracy of the dustbin mould depends to a great extent on the technical means of mould processing.
(3) Technical level of dustbin mould assembly fitter. The guarantee of the precision of the mould needs high-level mould assembly fitters to realize, especially the roughness value of the polished surface of the mould mainly depends on the mould fitters to complete the mould. Therefore, the technical level of mould fitters is an important factor affecting the precision of injection mould.
(4) Production mode and management level of garbage dustbin mould manufacturing. The difference between production mode and management mode will affect the precision of the mould. For example, when designing and producing the die, whether to adopt "real matching method" or "separate manufacturing method" is an important factor affecting the assembly precision of the die.
Click Crate Mould https://www.furnituremould.com/
to learn about more information. less -
Jul 24 - posted by xiu xiu, 1 like, 0 followers, 1 member, 0 comments, 1 viewCities that have switched or are considering switching Led Public lighting(CLASSIC) https://www.classicledlight.com/
will generally improve safety and the economy of LED public lighting systems.... moreCities that have switched or are considering switching Led Public lighting(CLASSIC) https://www.classicledlight.com/
will generally improve safety and the economy of LED public lighting systems. From a safety point of view, the light emitted by LED public lighting can be aimed and controlled to eliminate the common black spots and shadows of traditional metal halide lamps or high-pressure sodium lamps. LED public lighting has many different light distribution modes. These lamps can be mixed and matched to provide uniform lighting on sidewalks and roads.
Compared with traditional lamps, the quality of LED public lighting is also greatly improved. LED public lighting can produce light with a higher colour rendering index than traditional lighting, which is closer to natural sunlight than other artificial light sources. A higher CRI can better explain the subtle differences and subtle contrast changes on the surface of roads and sidewalks. Under LED public lighting, drivers and pedestrians can see everything more clearly.
There is no doubt about the economy and cost savings that a city can achieve by reforming LED public lighting. Modern LED public lighting can produce the same or better lighting as traditional public lighting lamps, with energy input reduced by up to 50%. LED public lighting can also work continuously for more than 50,000 hours, or even as high as 100,000 hours in some cases, and the lighting quality will not deteriorate. Between utility cost saving and maintenance cost reduction, the city will recover its initial investment in LED public lighting in less than two years.
Lower energy consumption and operating costs have also been translated into lower carbon footprint, which satisfies the measures taken by many cities to be more environmentally friendly and to seek sustainable solutions to common problems. Cities that are the targets of complaints about light pollution will gain additional benefits from the excellent control features of LED public lighting systems. Among many other advantages, LED public lighting is dimmable and can achieve full lighting within a few seconds after power is applied. The city can use these functions to reduce the lighting level when there are fewer drivers or pedestrians on the street and to restore the lights to full lighting when there are more cars and pedestrian traffic.
If you are ready to upgrade to a more efficient lighting system, for more information, please click public lighting https://www.classicledlight.com/
. less -
Jul 23 - posted by ko koele, 1 like, 0 followers, 1 member, 0 comments, 2 viewsSimilar to the current air purifiers, the Water Filter Cartridges(KOKOELECTRIC) https://www.kokoelectric.com/product/water-filter-cartridges/
are also of many brands, and the functions are also... moreSimilar to the current air purifiers, the Water Filter Cartridges(KOKOELECTRIC) https://www.kokoelectric.com/product/water-filter-cartridges/
are also of many brands, and the functions are also blown away. Is the water filter cartridge as much as possible? Can the water filter cartridge not change for a long time? In the face of these quite impressive words of water purifiers, are you also deeply misunderstood and unconsciously "in the middle of the move"?
At present, some low-end water purifiers on the market are equipped with four or five water filter cartridges and even more. However, if simple filter materials are used, the filtration effect may not be able to match a high-performance water filter cartridge. Therefore, in the specific purchase process, consumers do not need to blindly believe in the number of water filter cartridges but should pay more attention to the performance of the water filter cartridge itself.
As for the claim that the water filter cartridge does not need to be replaced for 3 to 5 years, consumers should pay more attention to it because it is often exaggerated. The reason is very simple. After all, the water filter cartridge that is blocked is a good water filter cartridge, which just indicates that there is a certain filtering effect. On the whole, the higher the quality of the water filter cartridge, the better the effect, so that not only the water purification has a corresponding guarantee, but also the service life will be longer.
In addition, do not look down on activated carbon water filter cartridge filtration technology, because activated carbon is the best filter adsorption material in nature. Activated carbon generally has three types of granular, powdery and activated carbon rods. The first two are relatively inexpensive and the filtration is not so thorough. The latter is safer and can be completely filtered by 100%. If it is unconventional and does not use activated carbon, no matter how high the declared filtration accuracy, the taste of the water will be a little discount.
Click Water Filters Manufacturer https://www.kokoelectric.com/product/water-filters/
to learn about more information. less -
Jul 22 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewRegarding the combine chains(GETECHAIN) https://www.getechain.com/
, even if the chain and sprocket planning fits well with the conditions and environment, if the smoothness is poor, it is impossible... moreRegarding the combine chains(GETECHAIN) https://www.getechain.com/
, even if the chain and sprocket planning fits well with the conditions and environment, if the smoothness is poor, it is impossible to fully utilize the planning function and ensure the service life.
The combine chains have excellent smoothness and smoothness in use, and the wear amount can be 200-300 times different. Once the smoothness is not enough, the pin and the sleeve will wear out, and the combine chains and the sprocket will be misaligned, and the noise will be caused, chain elongation, even the formation of broken links. The poor smoothness between the roller and the sleeve will result in the serious wear of these parts in the early stage and cannot be used continuously. Therefore, it is a crucial method to select the smooth oil viscosity, the oil supply direction and method, the oil supply distance and the oil injection amount, so that the conflicting surfaces between the combine chains are effective.
Can receive the following effects:
1. Reduce the wear and tear of the conflict;
2. Reduce power consumption;
3. Glue caused by adhesive wear;
4. Except for overheating due to conflict;
5. The transmission is stable and extends the service life.
Click Driving chain manufacturer https://www.getechain.com/product/driving-chain/
to learn about more information. less -
Jul 21 - posted by xiu umin, 1 like, 0 followers, 1 member, 0 comments, 1 view1. Convenient processing and maintenance
Dustbin Mould(FURNITUREMOULD) https://www.furnituremould.com/
is a rather complicated part. In the process of processing, it often encounters some... more1. Convenient processing and maintenance
Dustbin Mould(FURNITUREMOULD) https://www.furnituremould.com/
is a rather complicated part. In the process of processing, it often encounters some complicated and special shapes, which are difficult to process and repair. For these structures, the difficulty of processing and maintenance can be reduced by removing the mould insert of the garbage bin.
2. Easy moulding and demoulding
If the product has deep ribs or other structures that are not easy to form, these structures are easy to cause defects such as insufficient shot, scorching, and joint marks during forming. Dismantling the insert can effectively solve this problem. The clearance around the insert of the dustbin mould can not only facilitate the exhaust during moulding but also prevent the vacuum sticking phenomenon that may occur when the product is demoulded.
3. Increase the strength of the dustbin mould
In order to increase the strength of the dustbin mould and prolong the service life of the dustbin mould when there is a small area of insertion (or abutment) on the moulded parts such as die core or slide block, the insertion (or abutment) part can be disassembled into inserts and replaced with better materials.
4. Save materials and reduce costs
When parts such as die core or slide block are moulded, when the shape of the parts is much higher than other surfaces or is unfavorable for processing, the mould insert of the garbage can be disassembled to save materials and reduce the processing cost, otherwise the size will increase when preparing materials, the processing will be time-consuming and the cost will be greatly wasted.
Click Crate Mould https://www.furnituremould.com/
to learn about more information. less -
Jul 17 - posted by ko koele, 1 like, 0 followers, 1 member, 0 comments, 1 viewAs we all know, the Water Filter Cartridges(KOKOELECTRIC) https://www.kokoelectric.com/product/water-filter-cartridges/
are the most important core part of the water purifier, which determines the... moreAs we all know, the Water Filter Cartridges(KOKOELECTRIC) https://www.kokoelectric.com/product/water-filter-cartridges/
are the most important core part of the water purifier, which determines the filtering effect. In early water purification machines, filtration by a single water filter cartridges was common, but this filtration method could not completely remove pollutants in the water, and the pollutants quickly gathered, which greatly reduced the service life of the water filter cartridges and resulted in poor water purification effect. In order to avoid the above problems, the water purifier adopts a combination of four to six levels of water filter cartridges, which improves the water purification effect on the one hand and prolongs the service life of the water filtering barrels on the other.
The following is an example of the combination of five-stage water filter cartridges:
Primary filtration: currently, water purification machines on the market generally use 5μm PP cotton as the material of water filtration barrel to remove large particle impurities such as rust, silt, and suspended solids. Crude filtration is generally replaced every 3-6 months.
Secondary filtration: Granular activated carbon filter element (UDF) integrates adsorption, filtration, interception, and catalysis, and can effectively remove chemical pollution caused by pesticides, pesticide residues, organic solvents, and other industries. But also can effectively remove organic matters, residual chlorine, and other radioactive substances in water, and has the effects of decoloring and deodorizing. The general service life is 3-6 months.
Three-stage filtration: Sintered activated carbon is used as the filter element material (CTO) (PPcotton is used as the filter element material by some manufacturers), which deeply absorbs different colors, peculiar smell and residual chlorine in water and filters out fine impurities. It is used in the third stage of the water purifier and also protects the main filter element of the water purifier. Its service life is generally 3-6 months.
Four-stage filtration and one main filtration water filtration barrel (if you need to know the filtration principle of various filter elements, please go to the headspace to see the professional introduction of various water purifiers)
1. Ultrafiltration membrane water filter cartridges: it is recommended to replace it once every 23 years.
2. nanofiltration membrane water filter cartridges: it is recommended to replace it every 2 years.
3. RO reverse osmosis membrane water filter cartridges: it is recommended to replace it every 2 years.
4. High-density activated carbon water filter cartridges: it is recommended to replace it once a year.
Five-stage filtration: The rear activated carbon water filter tank (T33) is the last working procedure of the water purifier, which can further adsorb different color and peculiar smell in water, increase the oxygen content of purified water, and mainly improve the taste of water. Especially for water purification machines using pressure water storage tanks, the silver-loaded activated carbon filter material is recommended for the post-installed activated carbon, which can effectively absorb the peculiar smell generated by the water storage tanks, sterilize and inhibit bacteria, and ensure the safety of drinking water. The recommended service life is 12 months.
Activated carbon water purifier uses ultraviolet lamps to kill fine and microorganisms. It is recommended to replace it once a year.
Click Water Filters Manufacturer https://www.kokoelectric.com/product/water-filters/
to learn about more information. less -
Jul 16 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewUnder normal circumstances, the agricultural chain(GETECHAIN) https://www.getechain.com/product/agricultural-chain/
is still relatively difficult to rust, but if rust occurs in the process of use,... moreUnder normal circumstances, the agricultural chain(GETECHAIN) https://www.getechain.com/product/agricultural-chain/
is still relatively difficult to rust, but if rust occurs in the process of use, there are often some special reasons, which will be introduced here.
1. Not strictly following the anti-rust operation procedures
Not strictly according to the requirements of cleaning and antitrust procedures and oil seal antirust packaging, the agricultural chain parts in the processing process and the assembled chain finished products were antirusts treated. For example, the chain is in contact with corrosive liquid or gas.
2. The quality of lubricant does not pass muster.
Lubricants and cleaning agents used by enterprises at ordinary times are fake and inferior products, which cannot protect the safety of the chain and even contain impurities harmful to the agricultural chain. Therefore, enterprises should choose products with good quality and brands to avoid irreversible results.
3. The quality of the agricultural chain itself
In order to save costs, some manufacturers have chosen relatively cheap raw materials, resulting in the initial quality of the agricultural chain is not good, will inevitably be corroded.
4. There are problems with the use environment
Enterprises use agricultural chains in humid or acid-base environments, which is likely to cause rusting of agricultural chains.
Click Driving chain manufacturer https://www.getechain.com/product/driving-chain/
to learn about more information. less -
Jul 15 - posted by xiu umin, 1 like, 0 followers, 1 member, 0 comments, 1 viewFirst of all, we must analyze the reasons for the rust of the Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
:
1. A product of decomposition of an injection moulding... moreFirst of all, we must analyze the reasons for the rust of the Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
:
1. A product of decomposition of an injection moulding material.
Injection moulding produces the most common corrosion of furniture mould. In order to prevent the rust of the furniture mould, the most widely used method is to chrome the furniture mould cavity, but the plating treatment cannot fully solve the problem, because the decomposition product is also corroded to the deep part of the pin hole.
2. The furniture mould has regained its momentum.
The furniture mould is cooled to the point of regaining moisture. The moisture in the air is attached to the surface of the furniture mould to generate water vapor, which will cause the furniture mould to rust.
3. The hand sweat of the fitter.
There are also other foreign objects such as circulating water, steam, and the like.
So we have listed the following solutions:
1. Short-term countermeasures; gently rub the surface of the cavity with a cloth. The moulding material is sufficiently dried to lower the temperature of the barrel to prevent decomposition of the material.
2. Long-term; the material of the product is turned into a material that does not corrode the furniture mould. Materials that are easily decomposed due to differences in plastic materials, such as PVC, POM, PC materials, etc. Since the decomposition product has a corrosive effect on the furniture mould, the furniture mould should be chrome-plated.
3. When temporarily stopping the moulding, spray the rust inhibitor on the furniture mould cavity and close the mould.
4. When the furniture mould is stopped for a long time, apply a layer of butter to the outside of the furniture mould and the moving parts.
Click Air Cooler Mould https://www.furnituremould.com/
to learn about more information. less -
Jul 14 - posted by xiu xiu, 1 like, 0 followers, 1 member, 0 comments, 1 viewDespite advances in logistics, just-in-time production processes, and distribution networks, warehouses are still an important component of industrial, commercial and consumer goods supply and... moreDespite advances in logistics, just-in-time production processes, and distribution networks, warehouses are still an important component of industrial, commercial and consumer goods supply and distribution networks. In this new environment, warehouse operators are under pressure to continuously reduce costs and help manufacturers and shippers store and deliver raw materials and finished products at the lowest possible price. Warehouse cost savings are usually achieved by reducing indirect costs. The most direct way to reduce these costs is to use more efficient public lighting(CLASSICLEDLIGHT) https://www.classicledlight.com/
.
Public lighting accounts for 50 to 75 percent of the warehouse's electricity consumption. According to a recent measure, if all warehouses in the United States switch to more efficient public lighting equipment, they will save a total of more than $12 billion in annual electricity bills. Gaowan metal halide lamps or high-pressure sodium lamps are currently the most common form of public lighting in warehouses, but warehouses are transitioning to light emitting diodes to achieve the cost savings estimated by these recent measures.
If you are ready to upgrade to a more efficient lighting system, for more information, please click Led Public lighting https://www.classicledlight.com/
. less -
Jul 12 - posted by ko koele, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe working pressure of the water filter is suitable at 6-8kg/cm2. If it is lower, it needs to be properly pressurized according to the situation. However, boosting requires the use of a... moreThe working pressure of the water filter is suitable at 6-8kg/cm2. If it is lower, it needs to be properly pressurized according to the situation. However, boosting requires the use of a high-pressure pump. Water can only be started when the water is pressurized to the proper range. So what is a high-pressure pump? What are the characteristics of the water pump booster pump? You may wish to hear what the Water Filters Manufacturer(KOKOELECTRIC) https://www.kokoelectric.com/product/water-filters/
says.
1. The water filter booster pump is a device that provides high-voltage power, and the gas drive part is made of aluminum alloy. The complete set of seals of the pump is preferably imported quality products. Otherwise, abnormal conditions may occur during use, and it can only be blamed for not buying good quality products. To ensure the life of the pump, it is recommended to use a pressure of less than 8 bar.
2. The water filter booster pump has the characteristics of high pressure, low noise, strong impact resistance, and long service life. It has been widely used in various industries in recent years and is very popular.
3. When the water booster pump is started, the current of the motor will be 5-6 times higher than the rated value, which will not only affect the service life of the motor but also consume more power. The system will stay in the motor selection during design. With a certain margin, the speed of the motor is fixed.
4. If overpressure, over-temperature, severe water leakage, and solenoid valve control failure are found to be ineffective, the valve should be closed immediately.
5. After the water filter booster pump stops running, the water filter solenoid valve cuts off the lubricating oil pump power supply, closes the lubricating oil cooling water valve, and carefully checks.
Click Water Filter Cartridges https://www.kokoelectric.com/product/water-filter-cartridges/
to learn about more information. less -
Jul 11 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewThe agricultural chain(GETECHAIN) https://www.getechain.com/product/agricultural-chain/
may be damaged due to various reasons when in use. In order to ensure continuous operation, the chains should... moreThe agricultural chain(GETECHAIN) https://www.getechain.com/product/agricultural-chain/
may be damaged due to various reasons when in use. In order to ensure continuous operation, the chains should be replaced and can be replaced separately, but the corresponding parts of the two chains should be replaced at the same time to ensure the same solution on both sides. Let's analyze the cause of the damage.
1. Impact damage
When subjected to instantaneous excessive impact load, the agricultural chain will produce great stress and deformation, which is very easy to break.
2. Fatigue damage
If the long-term cycle sophisticates the load function, will cause the agricultural chain to produce the fatigue and the fracture, moreover if the chain itself also has the surface flaw, after produces the crack will deepen unceasingly.
3. Friction
In the process of use, there will be constant friction between the chain ring and the chain wheel, resulting in wear and even deformation, which will lead to strength reduction. At last, the chain ring will be pulled off as long as it is impacted, especially when the material and manufacturing quality do not meet the standard requirements, which will be easier.
Click Driving chain manufacturer https://www.getechain.com/product/driving-chain/
to learn about more information. less -
-
Jul 10 - posted by xiu umin, 1 like, 0 followers, 1 member, 0 comments, 1 viewThere is much common software in Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
industry, such as PROE/UG, etc. This may vary according to the usage habits of different people. At... moreThere is much common software in Furniture Mould(FURNITUREMOULD) https://www.furnituremould.com/
industry, such as PROE/UG, etc. This may vary according to the usage habits of different people. At present, UG is used in a large part of furniture mould design.
On UG:
(1) UG software is called Unigraphics NX, a product engineering solution software.
(2) Functions of 2)UG software: Provide digital modelling and verification methods for users to design products and processes. At the same time, the software has a wealth of user guides, which can be convenient for designers to design furniture mould.
(3) UG software features：1. This is a completely interactive computer-aided design and manufacturing system. 2. It is powerful and easy to realize various complicated entities and modelling. 3. The three-dimensional design has become the mainstream application in furniture mould industry.
(4) UG software development: UG development started in 1969 and is based on C language development and implementation. UG is a flexible numerical tool, which is used to solve partial differential equations in 3D unstructured grids by using the adaptive multigrid method.
Click Air Cooler Mould https://www.furnituremould.com/
to learn about more information. less -
Jul 9 - posted by ko koele, 1 like, 0 followers, 1 member, 0 comments, 1 viewImportant Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
also include pressure barrels. As we all know, the water purifier is composed of many accessories such as filter... moreImportant Water Purifier Spare Parts(KOKOELECTRIC) https://www.kokoelectric.com/
also include pressure barrels. As we all know, the water purifier is composed of many accessories such as filter element, check valve, solenoid valve, pressure barrel, etc. Although these accessories have different structures, they are all compact in size. There is only one big accessory similar to "capsule", which is large in size and occupies a lot of home space. These water purifier spare parts is a pressure barrel.
Although many beginners in the wholesale of water purifier spare parts will do their homework in advance to learn more about the pressure barrel. However, not everyone in the water purification industry really knows what a pressure barrel is and what it does. Consumers are even more confused.
The so-called "pressure bucket" is actually a water storage bucket, but this water storage bucket is a water storage bucket that works under pressure-the water purifier uses the pressure of the airbag inside the pressure bucket to drain and feed water.
An inflatable airbag is embedded in the pressure barrel of the water purifier. When drinking water enters the barrel, the airbag is squeezed, so that the water inlet is subjected to reverse pressure. When the reverse pressure is equal to the water inlet pressure, the pressure barrel is filled with water. At this time, the water inlet stops, and the water making process of the water purifier ends and stops. Then, when the user needs to drink water, turn on the faucet, and the opposite side of the water yearns for outflow, generating outward pressure, and the water flows out. This is how the pressure barrel circulates water into and out of the water to complete the entire water making the process of the water purifier.
As an important water purifier spare parts, there is a pressure of 2-3kg in the pressure barrel to ensure stable and smooth water outlet from the water purifier. Take a reverse osmosis membrane water purifier as an example: since the reverse osmosis membrane has high filtration accuracy, it can remove most of the impurities in the water, but it also affects the water flow rate. If we do not use the pressure system, we can directly turn on the faucet and only see a small amount of water dripping down. Therefore, each water purifier needs to be equipped with a pressure barrel, and through the reaction force of the airbag therein, the water yield is increased.
Click Water Filter Spare Parts https://www.kokoelectric.com/
to learn about more information. less -
Jul 8 - posted by minseok kim, 1 like, 0 followers, 1 member, 0 comments, 1 viewWhen lubricating heavy roller chain(GETECHAIN) https://www.getechain.com/product/driving-chain/heavy-roller-chain/
, it is very important to choose suitable lubricants. First, low-quality or impure... moreWhen lubricating heavy roller chain(GETECHAIN) https://www.getechain.com/product/driving-chain/heavy-roller-chain/
, it is very important to choose suitable lubricants. First, low-quality or impure oils should be avoided. Low-quality lubricants cannot provide effective lubrication, and acidic substances or abrasive particles in them can damage the heavy roller chain and cannot be repaired. Also note that heavy oil or grease is too thick to penetrate into the inner surface of heavy roller chain, so it should not be used.
1. Low enough viscosity to allow lubricating oil to penetrate into the surface to be lubricated.
2. Under normal bearing pressure, it can keep the viscosity of lubricating oil film high enough or add appropriate additives.
3. Clean and free of corrosive substances.
4. Under normal working conditions, it has the ability to maintain lubrication quality. In general, high-quality lubricating oil extracted from petroleum without detergent can meet these requirements. Generally, detergent is not required, but it is better to contain additives that prevent foaming, rust and increase the strength of oil film.
Click Roller chain https://www.getechain.com/product/driving-chain/heavy-roller-chain/
to learn about more information. less -
Jul 7 - posted by xiu xiu, 1 like, 0 followers, 1 member, 0 comments, 1 viewSports fans may notice some changes taking place in outdoor stadiums and arenas where their favorite teams play. The old metal halide and high-pressure sodium lights in these facilities are being... moreSports fans may notice some changes taking place in outdoor stadiums and arenas where their favorite teams play. The old metal halide and high-pressure sodium lights in these facilities are being eliminated and replaced by new public lighting(CLASSIC) https://www.classicledlight.com/
. Fans can see new public lighting, for example, in the home stadiums of the National Football League's Houston Texans and Arizona Cardinals. The NFL is probably the most well-known league to use public lighting, but universities and other public outdoor sports venues are also following the trend of light emitting diodes. When considering the advantages of light emitting diodes over traditional public lighting, it is easy to understand why light emitting public lighting is changing outdoor sports.
A typical professional or university outdoor football field holds 10 to 15 football matches every year. Football stadiums have little or no revenue because they are not used. Stadium operators need to find ways to make the best use of these facilities and save operating costs to justify the existence of stadiums and the capital expenditure for their construction. For stadium operators, public lighting is a key component to solve this problem.
Click Led Public lighting https://www.classicledlight.com/
to learn about more information. less
Locations on MyWorldGo
Loading ... 
