How to control the quality of Dustbin Mould?

　　Dustbin Mould has high requirements. Trash can molds usually use environmentally friendly PP materials, which can produce a bright surface, and then undergo film printing and other treatments. It becomes a high-end trash can, but there is no need to make a high-quality trash can. simple. First of all, the quality of the mold must be controlled, including mold design, mold assembly, hot runner and cold runner selection, etc. As the saying goes, laymen are excited and experts are at the door. Annoying mold tells you how to better control plasticity problems during mold processing?

　　The newly designed Dustbin Mould assembly customized by the mold factory is just like an assembly machine. Every component and every screw must not be wrong, otherwise, the consequences will be very serious, ranging from minor to product defects, affecting production, and the other completely damaging the mold and causing scrap. Therefore, the assembly work must be very meticulous. During the assembly process, please pay attention to the cleanliness of the mold, especially the cleanliness of the waterway and screw holes. The iron filings must be blown up, otherwise, the customer will be very angry and the consequences will be very serious.

　　Drawer Mould is also our product, welcome to consult and purchase.