Discussed the compression of Round Enameled Copper Wire .
The scientific method is used to study the feasibility of forming operation in the groove of the motor after the winding process. The motivation for this method is that it requires a higher fill factor, which is comparable to the hairpin technique. However, by using separate parallel conductors with a higher number of turns, it is also possible to reduce frequency-related losses in a higher driving speed range.

In addition, due to the coating process, the quality of the insulation layer of the round wire is better than that of the special-shaped wire, except for the extrusion insulation. This makes round wires more suitable for compression and higher voltage applications.
First, the current technical state is introduced, and the applicable winding test procedures and test settings are introduced. For experimental verification, a model groove was designed and built.

Introduce and select possible groove design parameters according to the design of experiment method (DoE). The different measurement methods used to characterize the insulation quality after processing and the resulting wire deformation are discussed. The important input variables are pressure, wire insulation thickness (measured in grade), number of turns per coil, and wire diameter. The key output variables are the achieved fill factor improvement, partial discharge voltage and coil resistance. According to the full factor DoE, the experimental plan for the selected method and conclusion results is being discussed based on the main effects diagram.​​ In the outlook, further investigation topics are outlined.

It can be proved that the compression process of enameled round copper wire is very suitable, reaching the critical limit of quality, and is used for the production improvement of the coil in the groove of the motor. Therefore, considering the electrical insulation properties of the windings, this process represents a promising method for increasing the fill factor. The first investigation can show that certain electrical characteristics, such as partial discharge characteristics, can even be improved in certain areas.

After knowing this discussion of enameled copper wire , would you also be interested in these related products?
If you are interested, please contact us directly.