Condenser Manufacturer introduces the difference between condenser and cooler:

1. Different uses

The purpose is also different. The cooler is used to cool the material without phase change. The condenser is used to cool and condense the gas phase with phase change.

2. The difference in heat transfer coefficient

Generally speaking, since the heat transfer film coefficient of the condensation process is much greater than that of the cooling process without phase change, the total heat transfer coefficient of the condenser is generally much larger than that of the simple cooling process, sometimes by an order of magnitude.

A condenser is generally used to cool gas into a liquid. The condenser usually has a very hot shell. The concept of cooler is relatively broad. It mainly refers to a kind of heat exchange that converts the hot-cold medium to room temperature or a lower temperature. equipment.

3. Different phase transitions

The condenser will condense the gas phase and transform it into a liquid phase. The cooling water of the cooler only cools, there is no phase change, just a pure temperature change; in addition, the cooling medium they use is also different.

The condenser is a heat exchange device that condenses into a liquid material by absorbing the heat of the vaporous material. There is a phase change, and the change is quite obvious. The cooling medium can absorb heat directly or indirectly from the condensed medium, but there is no change in phase change. And can also Custom Condenser Coils.