More from ao xu
More in Politics
Related Blogs
أرشيف
حصة الاجتماعي
Features of Plastic Injection Mold ManufacturersPlastic Injection Mold
الجسم
The importance of Plastic Injection Mold gate location
The location of the Plastic Injection Mold Manufacturers 's Plastic Injection Moldgate directly affects the quality of the finished part, so consider the following general rules:
Gates should be kept away from pins, cores and other internal obstructions. Otherwise, this can cause weld marks as molten plastic flows around them and reforms on the other side
Gates should be placed closest to the thick walled area to ensure complete packing
Improper gate placement can cause part distortion if the build volume is not filled evenly across the part
The gate is a stressful area. Try to place gates away from finished parts where they can be affected by stress traces or potential degradation of the plastic that occurs in these areas
Doors need to be located in areas that can be easily closed manually or automatically. Note that some plastics are susceptible to high shear forces, so doors should only be removed manually
Thin-walled parts may require flow channels or additional gates to provide adequate amounts of plastic with minimal cycle time
For more product-related information, please click: Auto Parts Mold
تعليقات