Precautions for using vane pump
  • Etiquetas - #Vane Pumps
    • Última actualización 27 de agosto de 2020
    • 0 comentarios, 278 vistas, 0 likes
  • Yuhuang Chemical Inc, Louisiana 3127, Saint James, LA, USA - Obtener las direcciones

More from Cassidy vanepump

  • How to avoid the failure of vane pump
    0 comentarios, 0 likes
  • Precautions for using hydraulic vane pump
    0 comentarios, 0 likes
  • How to solve the failure of the vane pump
    0 comentarios, 0 likes

More in Politics

  • Norton antivirus account login
    31 comentarios, 144.780 vistas
  • Liquidity Locking Made Easy
    10 comentarios, 83.093 vistas
  • Ang jili178 login ay nagdudulot sa iyo ng mga laro ng slot at karanasan sa laro ng soccer
    2 comentarios, 46.576 vistas

Related Blogs

  • Exploring the Benefits of Top Up Zen in Industry None
    0 comentarios, 0 likes
  • Role Of Cloud Computing In Transforming The Healthcare Industry
    1 comentario , 0 likes
  • Comment l'utilisation du support d'\u00e9cran am\u00e9liore les performances optimales
    0 comentarios, 0 likes

Archivo

compartir social

Precautions for using vane pump

Publicado por Cassidy vanepump     27 de agosto de 2020    

Cuerpo

The use of a Vane Pumps is a delicate activity. A single mistake will cause the whole pump to be unusable or malfunction in use, resulting in damage to the pump parts and shortening the overall service life.

First of all, pay attention to the installation method of the vane pump.

If the coupling is too tight, due to the small or no gap between the coupling and the shaft, the bearing will be injured when it is struck hard, causing early damage to the bearing and affecting the life of the entire pump core. The shaft head is stressed, and the coupling does not reserve a certain amount of axial clearance during installation. Hardware installation will damage the bearing and the bearing retaining ring, and in severe cases, it will damage the entire pump core. Coaxiality. The coaxiality exceeds the specified value of the pump during installation, which will cause the bearing and the entire pump core to be eccentric and early damage. Generally, it is better to control it to less than or equal to about 0.1 mm.

Second, ensure the internal environment of the vane pump.

Because the fuel tank is not sealed, the surrounding dust and iron mixed into the oil can damage the oil pump early. As the cooling device is not installed, the oil temperature will continue to rise during continuous use of the machine. If the oil temperature exceeds 70 degrees for a long time, the life of the oil pump will be greatly shortened, and it will generally be damaged in half a year to a year. In a water-cooled device, due to the poor sealing of the water pipe, water enters the oil, causing the pump core parts to rust, lock, and the blades cannot be thrown out.

Finally, pay attention to the correct direction of the rotating oil port of the vane pump.

The pump core Xiaozi did not enter the hole. This is because the space of the oil pump suction port is reduced, and the oil suction is blocked. The oil suction is not smooth. The performance is: excessive noise, pressure swing, long-term use will cause the oil temperature to rise too fast, and the inner curve of the stator will impact The life is shortened after being corrugated. When rotating, the sealing ring is trimmed or the screws are not evenly tightened to cause Oil Pumps leakage.

Comentarios

0 comentarios