Classification Of Fiber Optic Splice Closure Patch Panels

Fiber optic cables have increasingly been used to meet the needs of high speed networks. In the data center, the cabling infrastructure has become more complex. In this case, maintaining good cable management is necessary because cluttered wiring will result in fiber loss and is not easy to troubleshoot. The Fiber Optic Splice Closure Patch Panel can then be used as a tool for the cabling system.

The fiber optic patch panel is also referred to as a fiber optic patch panel. It is used to terminate fiber optic cables and provide connections to a single spliced ​​fiber. In addition, fiber distribution frames create a safe environment for exposed fiber, housing connectors and connector units.

Fiber distribution frames can be divided into two types. Both types can accommodate, organize, manage and protect fiber optic cables, connectors and connectors.

One is a rack mount panel. Typically, rack mount panels are horizontally fixed in fiber and look like drawers. The rack mount panels are available in 1U, 2U, 4U sizes and can accommodate up to 288 or more fibers. There are two types of rack mount enclosures. One is slide-out and the other is a detachable cover. The sliding design of the panel allows engineers to easily access the internal fibers, but at a more expensive price. The cover type is cheaper but requires the user to remove the entire housing from the rack for internal access.

The other is a wall-mounted panel. Wall mounting panels are designed for enclosed wall mounting of adapter panels or splice trays. They are made of sheet steel and are finished with a light-textured black powder coating. These panels can be easily mounted to any wall using internal mounting holes. They protect fibers from dust or debris and organize cables.

A typical fiber distribution frame consists of four sections: an enclosed room (rack or wall mount), an adapter panel, a connector adapter (providing a low optical loss connection with a suitable connector), and a splice tray (assembly and fixed joint module) ). The adapters on the fiber distribution frame have different shapes, such as LC, SC, MTP, and the like. In most cases, all adapters are of the same type in the panel. However, when multiple types of fiber optic connectors are used in a network, panels with different types of adapters are sometimes required.

The fiber distribution frame has two compartments. One contains a bulkhead socket or adapter and the other is used for a splice tray and excess fiber storage. Wiring cable management trays are optional for some distribution frames and can store excess jumper length neatly.

Fiber optic patch panel ports provide space for data entry and exit panels. The number of these ports ranges from 12, 24, 48, 64, 72, 96 to 288 and more. In fact, there is no limit to the number of ports on the patch panel. As long as there is enough space, you can fill the chassis without disturbing the integrity.

The information about Fiber Optic Splice Closure : https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html