Fiber Closure Is Easy To Maintain And Repeat

With the rapid development of cable TV, the use of optical fiber is more extensive. However, the laying of fiber optic cables is often limited by environments such as traffic and point layout, and the number of connections between fiber optic cables is increasing. Cable TV transmission failures due to poor connection quality occur. Most of these faults are caused by fiber optics. The selection and use of Fiber Closure is due to improper use. Therefore, the reasonable selection and use of the field fiber connector box is an important part of improving the reliability of fiber transmission.

First consider the capacity of the fiber tray and choose the right fiber connector. Wired network fiber transmission mainly adopts a star network structure from the front room to the light receiving point. The number of fibers in a fiber optic cable is typically more or less, and fiber optic cable connections continue. The number of cables is different from the number of fibers. Therefore, the capacity of the fiber tray must be properly selected. If the capacity is too small, the fiber will be difficult, and if the capacity is too large, it will cause waste.

Fiber optic splice closures should have good air tightness to improve the tensile strength of the fiber. Apply 1-2 layers of pre-coating during the production process to achieve a tensile strength of about 7 kg. If the fiber optic splice closure is wet, gas and water accelerate the aging of the fiber surface coating and can also cause existing microcrack extension on the fiber surface. Over time, the strength of the fiber will be greatly reduced and the life of the fiber will be shortened.

Fiber optic closure should be easy to maintain and reuse. Due to the continuous development of urban construction, more cable TV trunk lines are being re-routed, and some residential communities are under construction. The number of fiber cores must have a certain amount of reservation so that it can be extended to the future. Therefore, the choice of new batteries and fiber splice boxes must consider the convenience of reconnecting and reconnecting the fibers.

The information about Fiber Closure: https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html