"Epson Error Code 0x97” If your Epson printer displays ", it will warn you. It could be caused by many things. It could be a failure of the motherboard or other internal components. After receiving the Epson error code number 0x97, your Epson printer won't be able to print. Follow the instructions below to fix this Epson error code 0x97.

Re-connect your Epson printer after disconnecting it

• First, open the Epson printer's case and check for any paper or pieces stuck inside. If you find any paper stuck to it, please remove it. You can then remove any paper from the strap.
• After this, you have to remove the cartridges you see in your Epson printer.
• Now, you will need to unplug the USB cables, you see in your Epson printer.
• After that, you need to tap on the power button and turn your printer off.
• Here, you should make sure to wait for some time and plug different USB cables removed from the Epson printer.
• You will now need to turn on the printer and verify that the print job is being completed. Epson error code 0x97  has been fixed.
• In case you find that the error has not been resolved yet, it is recommended to follow the next step.

Complete the Installation & Updation of drivers

Sometimes malware, viruses, trojans, and spyware can cause the error code 0x97. This is why you should make sure your Epson printer has the best protection and keep it up-to-date with the latest malware or virus protection software.

Unplug and plug the printer in an inverse manner

This troubleshooting technique works in the opposite direction to the previous one. This procedure will help you determine if the "0x97 error" is caused by an internal hardware problem.

• In the beginning, you are required to press the power button to turn the Epson printer off.
• You should now make sure that you unplug any other devices USB Cables
• Here, you need to wait for about five minutes.
• Now, you are required to press and hold the printer's power button for about one minute.
• As you try to tap on the power button, you should plug in the different USB cables.
• Now, you need to press the printer's power button for about one minute
• After that, you should immediately plug in the cables, once again.
• In this step, you should plug the power cable back, thereby releasing the power button.
• You should also check that the 0x97 error whether the Epson printer prints, it will continue to print.

Clean the Printhead & Printer Nozzles with Wet Tissue

You can see your "Epson printer not printing even” after you have done everything. You can then remove Epson Error Code 0x97, follow these steps to get the most out of your Epson printer:

• In the beginning, you need to unplug all the power cables from your Epson printer.
• Here, you require opening the printer case.
• Now, you should damp soft cloth pieces in warm water.
• After removing water from it, you have to clean the ink from the nozzle until it's fully clean and has no ink stuck on it.
• You can also soak the print head of your Epson printer device into the warm water in a bowl for at least 10-12 minutes.
• Now, take it out & the print head and clean it with a paper towel & wipe out all the water and ink dirt from it.
• Let it dry for at least 15-20 minutes.
• After drying it, you have to immediately insert the print head of your Epson printer into the "Print head section".
• Now, insert the cartridges correctly into the "cartridges section" of your printer.
• In the end, turn your "Epson printer" on, it will surely fix the "Epson error code 0x97" issue.

If your Epson error code is 0x97 continues to occur, then you can contact us via the live chat or toll-free phone number on our website. Our team of experts in printing is unmatched in their ability to provide the highest quality technical support without breaking the bank.