It is reported that the molds currently serving automobiles in my country account for about one-third of the total mold output. Among the automobile molds, which account for one-third of the total molds, stamping dies account for half of them. For example, it takes about 1500 molds to manufacture an ordinary car. Among them, there are nearly 1000 stamping dies and more than 200 interior molds. This shows the important position of Automotive Mold in the mold industry and the automotive industry. With the continuous development of the mold industry, automobile molds have taken a pivotal position in the domestic mold industry.

I have to admit that in the past ten years, my country's automobile industry has made great progress. The rapid development of China's automobile industry has brought a broad development space for domestic automobile molds. With China's current annual increase in automobile production, foreign capital has entered China to set up factories. To meet the hot domestic demand and export demand at the same time, the demand for automobile molds is inevitable. It has become a good opportunity for China's mold industry to enter the upgrading process. According to the Forecast of Production and Sales Demand and Transformation and Upgrading Analysis Report of China's Automobile Mould Industry by Qianzhan Industry Research Institute, domestic automobile sales have rapidly increased from 2,358,500 in 2001 to 18.5051 million in 2011, with an average annual compound growth rate of over 20%. Among them, the annual compound growth rate of cars with high demand for Auto Parts Mold is as high as 30%.

However, although domestic mold makers have great expectations for automobile molds, the imbalance in the development of domestic molds is also worthy of everyone's attention. From the current point of view, although China's auto production is amazing, many well-known foreign auto brands have also invested in capital and mass production. At the same time, as an important link in grasping the lifeline of the industry, stamping die has a regional imbalance in its development progress. China's auto mold industry is still lingering outside the mainstream industry chain. If you want to achieve rapid development, you must learn from abroad and introduce key technologies and advanced management methods. Of course, China's automobile mold industry still needs technological improvement, which will not change the global automobile industry generally regards China as the preferred automobile production base.