The Horizontal Rice Polisher Machine
  • Tags - #Rice Polisher
    • Last updated October 21, 2018
    • 0 comments, 343 views, 0 likes

More from gong liang

  • Some Information about the Rice Whitener Machinehitener Machine
    0 comments, 0 likes
  • Paddy Husker Should Be Regularly Maintained
    0 comments, 0 likes
  • Paddy Husker
    0 comments, 0 likes

More in Politics

  • Norton antivirus account login
    31 comments, 142,049 views
  • Liquidity Locking Made Easy
    10 comments, 82,707 views
  • Ang jili178 login ay nagdudulot sa iyo ng mga laro ng slot at karanasan sa laro ng soccer
    2 comments, 46,312 views

Related Blogs

  • Shopping for Sunglasses | Polarized vs Non-Polarized Explained
    0 comments, 0 likes
  • https:\/\/ricegum-keto-gummies-uk-official.jimdosite.com\/
    0 comments, 0 likes
  • The  Best HGH Supplements Gold importance
    0 comments, 0 likes

Archives

Social Share

The Horizontal Rice Polisher Machine

Posted By gong liang     October 21, 2018    

Body

Compared to the sturdy, solidly constructed vertical Rice Polisher(LIANGGONG) cone, the horizontal rice polisher machine developed by the Japanese is more compact in its construction details. Basically the machine consists of a cylindrical abrasive roll clamped on a horizontal shaft that runs at high speed (about 1000 rpm) in a cylindrical polishing chamber, which is covered with a slotted perforated sheet. A feeding screw, fixed on the horizontal shaft, feeds the rice into the free space between the abrasive roll and the slotted cylinder. A counter pressure is built up in this space by an adjustable valve fitted in the rice outlet spout of the machine. The counter pressure of this valve, which is controlled by a weight balance, controls the pressure and friction applied to the rice inside the machine. Over the full length of the cylindrical housing three rows of adjustable steel brakes are installed that can be adjusted from 0° (axial) to 90° (radial). These adjustable brakes direct the position of the rice grain inside the machine during the polishing process to obtain an optimum whitening efficiency.

For a long grain variety the position of the brakes is 0°. The rice grains are lined up in an axial direction and roll under pressure through the whitening chamber. For short grain varieties the position of the brakes is 90°. In this case the rice is lined up in a radial direction and tumbles through the pressure chamber of the machine. If long grain rice is processed in the machine at the 90° adjustment of the brakes the grain will be badly broken. The brake adjustment has a range between 0 and 90° and the correct angle of adjustment depends on the variety of rice to be processed. This remains a very critical point in the operation of this machine and requires an experienced operator. A disadvantage of this machine is that the clearance cannot be adjusted. Once the diameter of the 250-mm roll is reduced by about 6 mm it must be replaced. The rolls, which are made of grit 32 silicium carbide, cannot be recoated and new supplies from the manufacturers have to be secured continuously.

Click Rice Whitener to learn about more information.

Comments

0 comments