Continuity testing of threading tools Supplier's threading tools

During the threading process, the staff must meet the specifications required by international standards. Unreasonable pipeline laying, irregular installation steps, and imperfect management systems will all affect the effect. Therefore, there are also very strict requirements for threading, and the use of threading tools is essential. This use still needs to be implemented in a standardized way.

All cables should be fully tested for continuity after the worker has finished threading. Test method: Strip all the core wires at both ends of the cable to expose the copper core. Place the digital multimeter in the continuity test position at one end, and connect the two test leads to a pair of cable cores stably; at the other end, touch the pair of cable cores lightly. If you can hear the intermittent beeping sound at the end of the meter, it is ok, the core of each cable must be measured. The problems that can be found in this test are disconnection, disconnection, and wrong labeling.

So if you want to thread, you still need professional help. The same goes for people who want to engage in knife wholesale. All walks of life have their own rules and standards, and the wholesale industry naturally has its own standards and requirements.

For more product-related information, please click: cutting tools wholesale