The squeaking sound when the universal joint for truck is working means that the universal joint is about to be damaged. First of all, make sure whether the drive shaft is properly installed, you can take it out to check whether the universal joint is intact. A universal joint is a connector that allows the use of a drive shaft

Or in any other way to operate at various angles, it must be sure to bend in two different directions. Generally, there are two cases of gimbal damage.

The first is that as time goes by, the longer the use of the universal joint, the longer the small needle roller bearings may wear. In this case, the connection of the universal joint will become loose or inclined, which will cause the universal joint The high-speed vibration of the knuckle may cause the car to make a hoarse sound when switching to the reverse mode. In this case, you can use a screwdriver to pry it off or replace the drive shaft.

The second is that the universal joint is damaged due to being stuck. This phenomenon usually occurs when the bearing is flooded. The needle bearing is rusted and the universal joint will stop moving in one or two directions. If this is the case, you need to replace the universal joint or grease.

In addition, you can purchase more replacement joints when purchasing the universal joint. Regular maintenance of the bearing can also extend the service life of the 5-153X GU1000 PRECISION 369 universal joint.