In the process of using packing tapes for Strapping Seals for sale, we will inevitably encounter some problems. Today, we ask the strapping factory to simply answer three common questions.

1. The tightness is the key to measuring the effect of the packing tape, because too loose or too tight will affect the use of the product. Therefore, it is very important to master its tightness. To use it, let's understand its two-point seal.

1. 5%-25% is the ideal range of packing tape. According to the particularity of the packaging material, different degrees of stretching are carried out, but the control of the degree of stretching must be mastered.

2. Too tight, that is, the stretch is more than 25%. At this time, the elasticity of the strapping will be damaged by excessive stretching.

3. Too loose, that is, the elasticity is less than 5%. At this time, due to insufficient elongation of the strapping, its elasticity has not been fully exerted, and the strapping is relatively loose. Getting looser and looser, creating a slack situation.

2. Plastic-steel packing tape is a commonly used packing material. In addition to packaging some common products, some products that are difficult to package will also choose it for packaging. It's convenient to use, but it's also a bit cumbersome to use. The user, that is, the packing tape sometimes rolls up during use, what causes this phenomenon?

Generally speaking, there are two main factors that cause the winding tape to curl. One is due to improper operation. When running, the speeds of the three machines of the weft collector, the governor and the wire drawing machine must be synchronized, otherwise the cable ties may be curled; to avoid kinks, the cable ties may be curled.

3. The slipping of the packing belt is an accidental phenomenon. It's also about proper operation. How to deal with this phenomenon?

1. Slippage may also be due to low friction, so the friction will increase, such as traces.

2. PET Strapping seals seals for sale Most of the slippage is caused by loose joints. Therefore, connectors should be inspected before use.