Most people purchase Linksys range velop but they don’t know, how to login into the velop. In this post, you will know about this. So, read very carefully. 

 Let’s Jump in.

Basic Need For Linksys Velop Login Page

The login procedure does not require any specific product. But in arranging order you will need to follow some basic things during the time of the process. 

• WiFi device has an internet connection. 
• Having access to a web browser.
• Default IP address of a velop.

 These are the things that will you need in the login process. Now, let’s start the login page process. 

 Note: Linksys velop is also called by the other name of Linksys extender. So don’t be more confused in velop or in an extender.

How To Access Linksys velop Login Page

• Launch Web browser and type https://extender.linksys.com in the URL bar.
• Now, fill in the login credentials and arrange to access the login page.
• In case, if you forget the password then tap on the ‘Forgot Password' option from the login screen. 
• Now, follow the on-screen instructions to reset the WiFi password. 
• Type all applicable information such as network name/SSID, channel number, security type, etc. 
• In last, tap on the save setting button at the top of the login page. This step will establish a link for Linksys velop setup

Unable to Login to Linksys Page

Follow these steps to solve the login issue of the Linksys velop.

 Powercycle Your velop

 Disconnect and reconnect your Linksys velop from the power source. Now, wait for a few minutes to see the power LED light of the range velop. 

 Check the Status of a velop

 With the help of an indicator light, you can easily identify the status of the Linksys WiFi range velop. Now, check the user guide of the device to confirm your Linksys range velop is connected to the network connection. 

 See The Computer Connectivity to The Device.

 The ping test helps you to trace the communication between a velop and a computer. To ping your range velop, you will require to obtain an IP address. Ping test is just a part of troubleshooting that will help you to resolve the connectivity issue of a wireless or wired computer. 

Reset Linksys WiFi Range velop

Note: After trying this method if you are still facing an issue then there is the last option but not least try to reset your velop. If you don’t know how to reset then follow these steps. 

• Locate the reset button, which is mainly behind a back side of a velop.
• Press the reset button for 8 to 10 seconds with the help of a paper clip.  
• Make sure that doesn’t press the reset button so hard, otherwise it may destroy your extender gadget. 

Note:  After the reset, you will need to do the setup of a Linksys velop again. If you don’t know the proper setup then you can go to the Linksys Velop Setup app portal and follow the order. We believe, after reading this blog you would be able to know how to login into Linksys velop. I am so grateful that you read my post.