Mechanical Fiber Optic Splice Closure Stitching Step

Different Fiber Optic Splice Closure connections have different characteristics.

Mechanical fiber splicing

Step 1: Strip the fiber

Fiber preparation is here

This process and cutting are virtually identical to the fusion joint. Simply remove the protective coating, jacket, tube, and strong components to display bare fibers. Then ensure the cleanliness of the fiber.

Step 2: Cut the fibers for fusion. A cut at right angles to the fiber axis must be obtained on the fiber.

Step 3: Mechanically connect the fibers

In this step, no heating is used, such as in welding. Simply attach the fiber end to the mechanical connector unit. The index matching gel within the mechanical splice device will help couple light from one fiber end to the other.

Step 4: Protect the fiber

Once the fibers are spliced, they will be placed in the splice tray and placed in the splice closure. Enclosures of external equipment that do not use heat-shrink tubing will be carefully sealed to prevent moisture from damaging the joint.

Which method is better?

Both fusion and mechanical splicing methods have their advantages and disadvantages. The choice of fusion or mechanical joint depends on the application.

The cage provides a lower level of loss and a higher degree of durability than mechanical splicing. However, this method requires the use of expensive welding equipment. In view of this, the fusion splice tends to be used for long and high data rate lines of the installation and cannot be changed once installed.

Mechanical splices are used for applications that require very fast splicing, as well as applications where expensive equipment for welding may not be available. Some mechanical fiber optic connectors are easy to connect and disconnect. In this way, mechanical joints can be used in applications where the joint may not be as permanent.

Fiber bonding is an essential method in fiber network installation. Choosing the right method, whether it is welding or relying on the mechanical joints of its application, not only saves money, but also improves efficiency. When splicing is performed, specific instructions must be strictly followed to achieve perfect splicing. In addition, it is important to keep all splicing tools clean.

Greentelftth was registered in 1999 and specializes in the integration and service of optical communication network deployment and inspection customization projects. Green Telecom offers the most comprehensive choice of fiber optic box products for customers in different industries.

The information about Fiber Optic Splice Closure : https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html