Enameled Aluminum Wire Scraping Method

More from gaoke xiandeng

  • Not All Direct Solderability Of Enameled Aluminum Wire Is Applicable
    0 comments, 0 likes
  • Key Points About Enameled Aluminum Wire
    0 comments, 0 likes
  • The Main Reason Why Round Enameled Wire Cannot Be Soldered To Tin
    0 comments, 0 likes

More in Politics

  • Norton antivirus account login
    31 comments, 144,826 views
  • Liquidity Locking Made Easy
    10 comments, 83,118 views
  • Ang jili178 login ay nagdudulot sa iyo ng mga laro ng slot at karanasan sa laro ng soccer
    2 comments, 46,581 views

Related Blogs

  • Coloration painted aluminum sheet on the market
    0 comments, 0 likes
  • Mastering the Fine Details: How to Achieve Realistic Paint Jobs on Miniature Figures
    0 comments, 0 likes
  • How Using Artificial Grass Contributes to Water Conservation Efforts
    0 comments, 0 likes

Archives

Social Share

Enameled Aluminum Wire Scraping Method

Posted By gaoke xiandeng     January 18, 2021    

Body

For enameled aluminum wire, it must be stripped (there are very few requirements for household low fans, and ballast manufacturers do not strip). The stripping method I have tried is very cordial. Here is a list of its advantages and disadvantages. (1) You can use a razor to scrape; (2) You can use a knife to peel off the centrifuge; (3) You can also use paint to clean the worn wheels; (4) Of course you can use makeup remover; (5) You can also It can be used for high-temperature hot tin paint, (6) It can be burned off with fire (7) Of course, it can also be stripped with pink paint.

The scraping method of aluminum enameled wire is of course the most traditional method. There is not much technology. The surface damage of aluminum with special tools is relatively small. Without high temperature, the surface of aluminum will not form an oxide film, and the wire will not become brittle, but the efficiency is low. , It is only suitable for large-scale wire stripping. Wire diameter below 0.5MM is not suitable, because the thread is easy to be broken, the scraper is also hit continuously, the toughness is bad, and it is not suitable for large-scale operations, except for Rectangular Enameled Aluminum Wire being scratched. There are burrs on the surface, which is not conducive to welding.

Comments

0 comments