More from snip snip
More in Politics
Related Blogs
Archives
Social Share
Loosen Tubeless Snap Tire Valve Caps By These Steps
Body
What you will need:
Spray lubricant (WD-40)
2 snub-nosed pliers
Rotate your wheel/tire so the cap is upside down from your point of view.
Spray a small amount of lubricant onto the valve.
Tightly grasp the base of the Tubeless Snap Tire Valve stem with pliers.
Grasp the cap with your other set of pliers and twist until it becomes free.
Replace cap after filling tire with proper amount of air.
It’s that simple. This process shouldn’t take longer than a few minutes, but if you still have trouble getting the cap off, try using more WD-40 and let it sit for a little bit before twisting again. Your tires require a lot of care. You should check your PSI levels regularly and get your tires rotated once every 5,000 miles or so. Come to Auction Direct USA to learn more about our services and how you can better care for your tires. We hope this simple guide saves you some frustration when you have to fill your tires with air.
We are one of the Air Quick Coupler supplier and welcome to your come and purchase!
Comments