Our Air Quick Coupler can fail without warning! Prior to the operation of quick coupling products, be sure to inspect and replace worn out fittings and safety devices. If a leak is detected during operation, release the pressure from the circuit before investigating the cause of the fluid leak. Do not use your fingers or skin to check for leaks, high pressure leaks of fluids can easily penetrate the skin and can cause serious injury or death.

Construction-Workers-Nailing-Lumber-edited

Safe Quick Coupling Practices

Always wipe the coupling cavities and faces clean before connecting a coupling.
Connect coupling before installation to ensure that it works properly.
Always check the body seals before connecting a coupling.
Shut-off power source before connecting a coupling.
Always install a Safety-Check valve on a pneumatic line and/or compressor.
Always use a Safety-Cable on large air lines (½" lines and larger).
Always use a Whip Hose on hydraulic or air tools.
Use dust caps or plugs when couplings are not in use.
If the locking sleeve is inoperable, check the safety lock.
Wear eye protection while connecting or disconnecting a coupling.

Unsafe Quick Coupling Practices

Never hit coupling valves to release trapped pressure.
Never leave couplings in the path of moving equipment.
Never use couplings near a welder, flash heat, or fire / flame sources.
Never use API modified sealants or over apply PTFE tape.
Use care if you must install quick couplings onto black iron pipe.
Never hit a coupling sleeve with a hammer or blunt object.
Never over tighten a coupling connection.
Never rotate a quick disconnect coupling under pressure.
Do not over pressurize quick disconnect couplings.
Never use a hose with a quick disconnect coupling to lift a tool.

If you wantto buy Tire Chuck, send us messages!