It is especially important to choose a professional manufacturer of acrylic fish tank, because the tank itself is relatively large in volume, and its carrying capacity is very critical for carrying water. The materials used are thick, and the cost is high. If it is thin, it will deform or leak water over time.

So how should we distinguish the quality of acrylic fish tank? Today Mi Le will show you how to look at materials:

1. Ordinary glass-turquoise, fragile, low transparency, easy aging and deformation under rain and sun exposure, try not to be used to make fish tanks.

2. Float glass-transparent float glass is made by the glass paste entering the tin bath through the control gate, floating on the surface of molten tin due to gravity and its surface tension, and then entering the Xu Leng bath to make the two sides of the glass smooth and uniform and the ripples disappear. Dark green, smooth surface without ripples, good perspective and certain toughness.

3. Tempered glass-Tempered glass is a kind of high-strength safety glass obtained by heating the glass to its softening point and then rapidly air cooling. Under the same thickness, the bending strength of tempered glass is 4-5 times higher than that of ordinary glass, and the impact strength is 5 times higher than that of ordinary glass.

4. Acrylic glass-similar to a kind of glass material between plexiglass and ordinary glass, was originally used in airplanes. Most of the early angled fish tanks also used acrylic glass, which is light in weight and strong in toughness. It must be made integrally, easy to scratch and low in transparency.

5. PMMA, commonly known as PMMA, is an important thermoplastic developed earlier. It has good transparency, chemical stability, easy dyeing and easy processing. However, the strength is relatively low, and aquatic animals are generally not used except for some small craft tanks.

For more information, please contact us: acrylic aquarium manufacturer.