Another level has been raised in the sump of Beans Diesel/Bean Machine's tank 6061 Billet aluminum is used to make this product, which is built to last and is extremely easy to install. Install is as simple as it gets, requiring only a 3" hole and a single bolt, just like their original and groundbreaking design. cts2 tuner ensures a fast and straightforward installation and a low risk of leaks.

There are no further excursions to the hardware shop because their tank sumps come with a 3" hole saw and stainless or aluminum hardware. With a single O-ring, you can rest assured that there will be no leaks. Rather than using a pipe thread style fitting, their tank sump is the only one available. As a result, there will be fewer leaks, and the seal will be excellent. Quick disconnect connections (found on many aftermarket fuel systems) and 1/2" push-lock style hoses can both be used with the fittings. As a result, most aftermarket fuel systems will be able to use it right away. Even if you need a single-outlet sump, Beans has you covered.

The following are some of the products' features and advantages:

To maximize fuel efficiency, this vehicle utilizes all of its tank capacity. There are no concerns with sucking air when the tank is less than a quarter of the way complete. It's ideal for use with today's high flow lift pumps. Update and enhance the original tune of your truck by using gdp tunes.

• Filter system sediments can be reduced using a machined sump area for deposits.
• Allows future tank servicing or sediment emptying.
• Stainless Drain Plug
• Installation takes only five minutes, thanks to the single-bolt design. Tank sumps that use many bolts bored into the tank have a greater risk of leaking.
• In addition to the -8 ORB Plug, the kit includes stainless steel hardware, high-flow aluminum Quick Disconnect/push lock fittings, and quick disconnects.
• Installation requires only a 3" hole in your tank, provided with the kit.
• The inner ring is designed to go through the 3" hole so that the tank does not have to be dropped.
• Perfect seal thanks to the O-ring construction.
• A one-piece machined billet design that is exceptionally sturdy.
• The device can be put on any fuel tank with a 4-inch diameter flat area.
• It can be used on tanks made of either metal or plastic.

Beans Diesel Bean Machine Fuel Sump fixes all of these problems. To reduce the strain on the gasoline pump and eliminate quarter tank troubles, it is best to draw fuel from the bottom of the tank rather than the top. This beans sump is also a benefit because you can install your aftermarket fuel system without removing the fuel supply tank from the machine. The beans diesel sump is installed by drilling a hole in the bottom of the tank and cleaning off any shavings. You'll need a few simple tools, and the installation will be completed in less than three hours.