To install a stainless steel bathroom faucet, you must have the tools ready. The common tools for installing the faucet are: wrenches, kickers, decorative caps, rubber gaskets, etc. Here's how to install a Stainless Steel Bathroom Faucet ?

Before installing and installing the faucet, don't forget to rinse the water pipe to avoid damage to the faucet. And choose the right height buried pipe. The distance between the hot and cold pipes is about 15 cm. If there is a deviation, you can use the adjustment knob to correct. Then, when installing the faucet, you need to pay attention to the diameter of the water outlet. When installing, you need to reserve the height of the water inlet. For example, the basin is 35 cm. When installing the faucet, a special angle valve should be selected, and the angle valve needs to be fixed with the hot and cold water pipe.

If the distance between the angle valve and the tap pipe is long, use a special extension tube to connect. Remember, don't use other water pipes to connect, in that case, it is easy to fall off and leak. If the inlet pipe is too long to exceed the outlet pipe, it can be adjusted as needed. When installing the basin to remove water, don't forget to buy a small interface for the faucet.

Before installing the thermostatic faucet, look at which side of the hot water is cold water. Remember not to connect the hot and cold water pipes incorrectly to prevent the faucet from working properly. Install a thermostatic faucet, please don't forget to install a hot and cold water filter.