Spray bottles are a simple device that we use as an essential house cleaning products. Many other cleaning agents come in a spray bottle. However, many ultra fine mist sprayer manufacturer have such a design that makes it very difficult to use what it contains until the last bit of it. If you are wondering how to fix a spray bottle for efficient and effective use, you are in the right place.

　　Spray bottles also may stop working correctly for many other reasons. That is why, in this article, we have provided ways to fix the bottle easily. You don't have to wait long for a solution because we have given our best to provide you with ideas about fixing a spray bottle in this article.

　　How to fix a spray bottle easily

　　There are many reasons for a spray bottle to stop working. Sometimes the nozzle requires fixing and sometimes the pipe. It is essential to figure out what or where the problem is or what can go wrong before fixing the bottle. Once you know where the actual problem is, you can apply some methods to improve the spray bottle and make it useful and efficient again.

　　Find the problem

　　The spray bottle pump operates depending on a plastic piston loaded with spring; this process works through either with a vertical pump mechanism or a trigger. When you press the pump or pull the trigger, the piston forcefully ejects the piston container's liquid through the nozzle.

　　A screw generally fixes the nozzle on the adjustment cap. After every spraying operation, the piston automatically retracts, which forms a vacuity in the compartment that receives more liquid through the bottle's tube.

　　If the sprayer is not working, it's either because of blockage in the nozzle. Or there is damage in the piston seal. It can also be the inner tube isn't reaching the bottom of the liquid.

　　When you can find a problem with your spray bottle, you can easily find a solution. If you don't know what to do, then there are easy solutions given below.

　　Unblocking the nozzle

　　For the spray bottles that contain oil or anything that may solidify or get hard, such as hairspray or anything else, you may have to clear the nozzle regularly.

　　Before clearing the nozzle, unscrew the nozzle's cap by rotating it anticlockwise a little bit and try respraying it. If the sprayer's nozzle is too stiff, your sprayer might be operating then. If it is not strict, unscrew and separate the head of the nozzle and keep it under hot water running or use vinegar to submerge it. You can use something pointy or a pin to punch the nozzle's hole to clear it from any blockage.

　　If your bottle contains anything like a hairspray, you can use alcohol to dip the nozzle. You will have to dispatch the entire sprayer from the bottle and soak it in vinegar or alcohol for severe blockage.

     As a professional plastic pump head manufacturer,we accept all kinds of window hardware orders, welcome to consult.