More from Barbara Smith
More in Politics
Related Blogs
Archives
Social Share
Industrial Mixing Machine
Posted By Barbara Smith
Body
1.It is suitable for mixing powder-powder and power-liquid materials, especially for paste, powder and thick materials, such as putty, stone coatings, metal powders etc.
- It is a new type of mixing equipment with high efficiency, high uniformity, high load factor, low energy consumption, low pollution and little destruction of fragile material.
The main sections of mixer are barrel, ribbon agitators, feed ports, discharge port and driven unit.
4.Double ribbon mixer drives the material from two ends to the center through the outer ribbon, while the inner ribbon pushes the material from the center to two ends, so the material achieves high mixing effect in a short time.
5.Our ribbon mixer can be equipped with heating or cooling jacket if temperature control is required. We will add a spray or nebulizer unit in the tank.
Industrial Blender Powder Mixer
It is an efficient and versatile mixing machine for mixing dry granules & powders homogeneously. About two-thirds of the volume of the Ribbon Blender container is filled to ensure proper mixing. The Ribbon Blender gives the best results for mixing dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for pharmaceutical, food, chemical and cosmetic products etc. Material should be charged from the top. There are ports/ports to be fitted on the top cover for material charging and ventilation. A drain valve at the bottom in the center of the container. The discharge height can be adjusted according to the requirements, so that the material is discharged directly into the other container,
In Ribbon Blender, the powder moves from the center to the end of the container and the end of the container to the center of the container. Therefore, the required total mixing time is very short and the required speed is also very short. The dry material is given sufficient continuous movement by the shape of & movement of ribbon & shape of the container. Which material moves for proper mixing? The unit consists of one electric motor, one worm gear reduction, belt drive between motor and gear, torque drive between gear and (ribbon) mixing stirrer. Container with four Nos. of legs with drain valve & top cover. Both ends of the mixing shaft are sealed with bushing & PTFE gland housing & safety shields are fitted to all moving parts.
Machine with below applications
- Glue Instant drink mix
- Animal Feed Iron Oxide
- Antibiotics Minerals
- Asphalt Emulsion Milk Powder
- Bakery mix Natural gums
- Ceramics Nutraceuticals
- Other Industrial Mixing Applications
Comments