The elevator must be managed by someone. The elevator is the same as other electromechanical equipment. If it is used properly, there is a person responsible for management and regular maintenance. If the fault occurs, it can be repaired in time, and the fault can be completely eliminated. Not only can the downtime of the downtime be reduced, but also the elevator can be extended. The service life, improve the use effect, and promote the development of production. On the contrary, if used improperly, and no one is responsible for management and maintenance, not only can not play the normal role of the elevator, but also reduce the service life of the elevator, and even personal and equipment accidents, causing serious consequences. Practice has proved that the use of an elevator is good or bad, depending on the quality of the elevator manufacturing, installation, management and maintenance in the process of use. For a new elevator that has passed the installation and commissioning, whether it can achieve satisfactory benefits after delivery, the key lies in the quality of elevator management, safe inspection and reasonable use, daily maintenance and repair, etc. The Elevator Manufacturers will come to see it in detail.
Maintenance management common sense.

After the department receives a new elevator that has passed the installation and commissioning, the first thing to do is to designate a full-time or part-time management staff to properly handle problems in use, maintenance, inspection and repair after the elevator is put into operation. .

The number of elevators and the frequent units, management personnel, maintenance and repair personnel, drivers, etc. should be handled by more than one full-time staff or group, preferably not both, especially the maintenance and repair personnel and drivers must be full-time personnel.

In general, managers need to do the following:
(1) Collect the key to control the automatic door lock outside the elevator hall, the key of the elevator working state transfer switch on the control box, the key of the machine room door lock, etc.
(2) According to the specific circumstances of the unit, determine the driver and maintenance personnel, and send it to the units with qualified conditions for training.
(3) Collect and organize relevant technical materials of the elevator. After the data is collected, it shall be registered and accounted for and properly kept. Only one copy of the information should be contacted in advance.
(4) Collect and properly store elevator spare parts, spare parts, accessories and tools. According to the spare parts, spare parts, accessories and tool schedules in the random technical documents, clean up the spare parts, spare parts, accessories and special tools randomly collected from the proofreading, collect the various installation materials remaining after the elevator installation, and register and establish the accounts, and keep them in a safe place. In addition, the preparation and spare parts procurement plan should be compiled based on the technical data provided in the random technical documents.
(5) Establish elevator management, use, maintenance and repair systems according to the specific conditions and conditions of the unit.
(6) Familiar with the collected technical data of the elevator, and inform the relevant personnel about the situation of the elevator during installation, commissioning and acceptance. When the conditions are available, the elevator can be controlled for up and down trials several times, and the elevators are inspected carefully.
(7) Make necessary preparations and deliver the conditions after they are available, otherwise they should be temporarily sealed. When the storage time is too long, it should be properly handled as required by the technical documents.