There are many types of wash basin bathroom cabinet, generally there are the following commonly used varieties: 1. Angle type washbasin, because the angle type washbasin covers a small area, it is generally suitable for smaller bathrooms. Room for maneuver. 2. Ordinary washbasin, suitable for general decorated bathrooms, economical and practical, but not beautiful. 3. Vertical washbasin, suitable for small bathrooms. It can be matched with high-end indoor decoration and other luxurious sanitary ware.

The washbasin generally has three kinds of holes, namely, water inlet, overflow prevention and drainage holes. In order to fill the washbasin with water, the drain hole must be blocked. The drain hole is usually equipped with a special plug. Some plugs can be opened or closed directly, and some are controlled by the pull and pressure lever attached to the tap.

According to the number of water inlet holes in the washbasin, the washbasin has no holes, single holes and three holes.

The faucet of a non-porous washbasin should be installed on the countertop or on the wall behind the washbasin; the cold and hot water pipes of the single-hole washbasin are connected to the single-handle faucet through a hole, and the bottom of the faucet has a wire The three-hole washbasin can be equipped with a single-handle hot and cold water faucet or a double-handle hot and cold water faucet. The cold and hot water pipes are connected to the two ends of the faucet through the holes on both sides, and the faucet is also Use a nut to tighten and fix the washbasin.

Wash basin bathroom cabinet cleaning: 1, do not scrub with sharp utensils. 2. Do not rinse with acidic substances. 3. Spray some disinfectant regularly.