Elevator Manufacturers share the basics of elevators:
1. Customization of foundation pit and shaft
First of all, although elevators of the same weight, the size of the hoistway and the depth of the foundation pit are similar, there are still some differences between the elevators of different brands. Therefore, when designing a design task book to the design institute, you should provide the design institute with all the elevator brands and elevator models that you want to use in the future so that the design institute can design the brands that require the most wells and foundation pits according to these brands. Therefore, if you intervene from the beginning of the project construction, you must pay attention to the size of the foundation pit and the hoistway.

2, the choice of ladder speed
The ladder speed of common elevators is basically divided into: 1.0m/s, 1.5 m/s (1.6 m/s), 1.75 m/s (1.8 m/s), 2.0 m/s, 2.5 m/s, 3 m/s. Wait, the higher the ladder speed, the more complicated the manufacturing process and the more expensive the elevator. Under normal circumstances, according to the fire regulations, within one minute, the elevator should complete the operation from the first floor to the top floor of the building. Therefore, calculate the speed of the ladder you need according to the height of the building. That is: if the building height is 100m, then 100m/60s=1.667. In this case, the ladder speed of 1.75 m/s or 1.8 m/s can be selected.

3, the choice of load capacity
There is no calculation method for this. Generally, it is based on the flow of people. The house generally uses 800kg elevators. The public construction should use at least 1000kg. If you choose a smaller load elevator, you can choose the elevator decoration that looks like you want to expand the space.

4, the material of the hall door, door frame, car decoration
The materials of the hall door, door frame, and car decoration are divided into high-to-low grades: etched steel plate, mirror steel plate, hairline steel plate and sprayed steel plate. The etched steel plate is based on the mirror steel plate or the hairline steel plate and is etched with various patterns. This decoration is beautiful and gorgeous and is generally suitable for medium and high-grade commercial construction.

Mirror steel is cheaper than etched steel. It is also a mid- to high-end elevator decoration. It is made of polished stainless steel plates like mirrors. Such a decoration will increase the sense of space in the elevator and also enhance the practicality. However, the defect of the mirror steel plate is that the steel plate is very afraid of grinding due to the fine production. After a long time of use, the surface has many scratches and needs to be replaced, which increases the operating cost in the future.

Hairline stainless steel is a high-end residential or low-grade public building commonly used elevator decoration, hairline stainless steel plate hairline shape can choose, hairline steel plate looks a bit grade, but it is very durable, is the use of more elevator decoration.

The price of sprayed steel is the cheapest, and there are a variety of colors and patterns to choose from. It is suitable for small-sized houses with a large number of young people, or for buildings with lower budgets. The top coat of sprayed steel is also very easy to wear and needs to be replaced regularly.

The interior and exterior decoration of the elevator provided by the elevator manufacturer is simple, artistic processing or luxurious decoration, which requires special decoration construction units to complete.